10/100Base-T to 100 Fiber Single-Mode Media Converter
The single-mode converter is designed to provide a simple and cost effective means of conversion between copper and fiber optic media on Ethernet/Fast Ethernet Networks. Enclosed in a compact, strong metal case the converter supports 100Mbps operation with autonegotiation and is fully compliant with IEEE 802.3 specification. The economically priced converter operates over a wide range of distance by using Optic fiber and Cat.5 UTP patch cord.
Packaging Contents Hardware Installation 
Panel Views and Descriptions
| LED | Status | Indication |
| PWR | On | Power is supplied to the media converter. |
| Off | No power is supplied to the media converter. |
|
| TP Link/ACT | On | The media converter is receiving link pulses from the TP port. |
| Blink | The media converter is receiving packets from the TP port. |
|
| Off | No connection is established. | |
| FX Link/ACT | On | The media converter is receiving link pulses from the FX device. |
| Blink | The media converter is receiving packets from the FX device. |
|
| Off | No connection is established. | |
| TP 100 | On | The TP port is operating at the speed of 100Mbps. |
| FX 100 | On | The FX device is operating at the speed of 100Mbps. |
| FDX/COL | Orange | The media converter is operating in full duplex mode. |
| Blink | Collision of packets occurs in the port. |
|
| Off | The media converter is operating in half duplex mode. |
Technical Specifications| Standard | IEEE 802.3 10/100Base-TX 100Base-FX |
| EMC | FCC part 15 Class A C-Tick VCCI Class A CE mark |
| Power adaptor | External; 5V 1A |
| Power consumption | 3.5W |
| Operation temperature | -10℃~55℃ |
| Storage temperature | -40℃~70℃ |
| Humidity | 5%~90%, non-condensing |
| TP cable | Cat. 5 |
| TP connector | RJ45 |
| Fiber connector | SC |
| Fiber type | Single-mode (9 or 10/125um) |
| Distance | 25km |
| Dimension | 98mm x 59mm x 24mm |
For business enquiries contact us at: webhost@hcl.in